MONARK SPRINGER DISK FORK 1 1/8 THREADLESS
The new Monark Mega springer fork is the best retro reproduction fork we have seen.
A HIGH QUALITY REPRODUCTION OF THE ORIGINAL You will not be disappointed with the quality, better than the originals! Also Have this fork in 1"inch threadless fork tube, Please Call or email Lynn 414-732-0017 or Lynn@CustomMotoredBicycles.com
MONARK DOUBLE SPRINGER DRUM FORK 1 1/8 THREADLESS
Monark springer fork is the best retro reproduction fork we have seen.
A HIGH QUALITY REPRODUCTION OF THE ORIGINAL You will not be disappointed with the quality, better than the originals!
1 1/8 TRIPLE TREE CHOPPER FORK,threadless,29 1/2 inches long adjustable trees,with allen head bolts.32mm diameter legs.This fork fits the Genesis Astra or Onyx when using a new 1 1/8" threadless headset.$78.00
SUNTOUR BLACK 1 1/8 THREADLESS SUSPENSION SHOCK DISC FORK with DISC TABS,1 1/8 inch threadless fork tube that is 8 3/4th inches long. Smooth internal coil spring action. Has disc brake mounts. $65.00
1 1/8th CHOPPER FORK TUBE TRIPLE TREE THREADLESS
Steering tube 28.6mm (1 1/8") OD, 345.94mm (13 5/8") long
Use with a 101.6mm - 266.7mm (4" - 10 1/2") frame headtube
Steering tube length can be cut down to fit your frame headtube
Top/bottom braces accept 31.8mm (1 1/4") OD legs
Use with a 1 1/8" threadless headset
Use with a 1 1/8" threadless stem
Use extra 1 1/8" steering tube spacers for more precise fitting
Tube arm holes are 3 9/16 apart can use a tire that is 3 1/2 inches wide.
1 1/8 THREADED HEADSET BLACK OR SILVER,black or silver please send an email to chose or silver will be sent. 25.4mm/ 34mm/30mm=25.4mm head nut inner diameter for stem diameter,34 mm inner diameter at frame head tube.Locking tension head nut, spacer,compression rubber,upper cone,upper bearing,upper cup,lower cup,lower bearing,water dust seal,crown race.$14.00
1 1/8 INCH THREADLESS HEADSET,the first headset that ever came with instructions! Locking tension adjuster, spacer,compression rubber,upper cone, upper bearing,upper cup,lower cup, lower bearing,water dust seal,crown race. 1-1/8"x34mmx30mm. $15.00
1 1/8 THREADLESS STEM 25.4mm ,this will work on handlebars that have a bigger center attachment 1 inch, holds 25.4mm center handlebars.$26.00
MONGOOSE 1 1/8 THREADLESS STEM BLACK,holds 22.2mm center diameter bars, bars that are 7/8 inch diameter throughout. $22.00
1 1/8"inch THREADLESS FORK 26" BLACK
Fork Total Length=28 inches
Head Tube Diameter=1 1/8inch, takes 1 1/8 inch Threadless Headset not included Crown race diameter= 30mm
Fork Tube Legnth= 11 1/2inches, 293mm
Distancke between fork tubes 3 inches maximum width tire 3.35inch
Fork tube hole caliper Brake compatable or for fenders
Weight= 2Lbs 10.2oz
SUNTOUR BLACK 1 1/8 THREADED SUSPENSION SHOCK FORK with DISC TABS 1 1/8 inch threaded fork tube that is 7 inches long.Smooth internal coil spring action. Has disc brake mounts and cantilever V brake mounts.
Bicycle Brands that may take a 1 1/8"inch forks and Headset are,Greenline, Genesis Onyx or Astra and Grubee SkyHawk GT2A Frames.
Vintage Schwinn frame head tubes are 5 6/16ths long.
Worksman frame head tubes are 5 5/16ths long.
Huffy Cranbrook and most Micargi head tubes are
4 3/4inches long.
To many parts to have them all on this website. Call if you do not see what you are looking for. 414-732-0017 Special orders Welcome for hard to find parts!!
NEW Parts available from Planet Bike, Wald and SUGINO cranks what crankset are you looking for or a part from PlanetBike at low discount prices, just inquire. Lynn 414-732-0017
For those looking to put springers on the GENISIS ONYX 29 inch wheel bikes, the distance between the lower fork tube and axle is 14.5 inches.You decide if the tire will fit.