2 stroke motors are 5 inches wide,4 stroke motors are 10 inches wide.Beacuase of the unreliability of the 2 stroke motors,experimenting with and carrying more 4 stroke parts.Can get just the Q MATIC gear box for your Huasheng or Honda motor.Call Lynn 414-732-0017 Q MATIC GEAR BOXES FOR HARBOR FREIGHT 79cc or 99cc preditor $299.00 + shipping $25.00=$324.00 TOTAL
NGK BPR5HS SPARK PLUG for Harbor Freight 99cc/79cc?
I run this spark plug in my Harbor freight 99cc motor, it starts right away now. Have not tried it in a 79cc motor. Replacement Spark Plug for 99cc Harbor Freight Motor.
RUIXING 4 STROKE CARBURETOR,Stock Carburetor for Engine: 49cc 4-stroke OHV HuaSheng HS 142F. Use a good fuel filter with this carburetor, debris from tank can clog jets. $38.00
GREYHOUND 2.5HP HORIZONTAL OHV GAS ENGINEModel # 97964
Fuel 89 + Octane Gasoline
Engine oil Capacity 13.5 oz
Box will be turned inside out so brown side is showing for shiptment.
MOTOR MOUNT PLATE for HF ENGINES, plate with the proper holes to line up with HF PREDATOR 79/99cc motors.
4 STROKE MOTOR MOUNTING PLATE with BRACKETS,mounting holes for Honda GXH50 or Huasheng 4-stroke motor. Heavy duty industrial use 4-stroke mount plate.$56.00
CHUANGXIN HONDA GX 160 CARBURETOR
This carburetor has a fuel shut off incorporated into it, the lower black lever. The upper longer black lever is the choke.
4 STROKE CDI IGNITION COIL,
4 Stroke Engine Part # 35 -- CDI Ignition Coil/ Ignition Starter
PULL START for HUASHENG 4-Cycle 49cc MOTOR.
5 3/8inch (137mm) distance between the 3 mounting holes.
STOCK HARBOR FREIGHT PREDATOR MUFFLER, take off from a 99cc Harbor Freight engine. Should also fit a 79cc engine.
PREDATOR GAS TANK, could be mounted on a rear rack, has a internal gas filter and gas cap.Holds .53 Gallons , 2.0 liter.$19.99
Stock Chain Guard, stock runs from engine to seat stay to cover drive chain can be attached with zip tie at seat stay,includes metal strap for muffler hanging. Call me if you would like 10 or more of these, we can work out combined shipping. $3.00
7G GHOST RACER TRANSMISSION FOR 49cc 5/8th STRAIGHT SHAFT ENGINE
COPPER BUSHING FOR 5/8 SHAFT GHOST RACER CLUTCH
Please check your specifications may need to be filed down, does not seem to fit like original, also flange is not as wide.
Inner diameter 5/8inch or 15.98mm
Outer Diameter 25/32inch or 20.10mm
Outer diameter of flange 29/32inch or 24.02mm
BELT DRIVE SHEAVE 14 1/2 INCH DIAMETER
This rear wheel sheave is for installing the rear transmission A and AX type V-belt to the spoke rear wheel (24" and 26" rim with 36 spokes) from clutch. Spoke size can be 10 or 12 gauge. This sheave kit is including a sheave, 9 spoke clamps and 18 bolts.
$25.00 shipping on all of these DRIVES. Testing out different drives and front drive pulley with the Harbor Freight 99cc PREDATOR.
Too many parts to have them all on this website. Call if you do not see what you are looking for. 414-732-0017 Special orders Welcome for hard to find parts!!NEW Parts available from Planet Bike, Wald and SUGINO cranks what crankset are you looking for or a part from Planet Bike at low discount prices, just inquire. Lynn 414-732-0017